Architectural profiles
Complete door and window systems supplied as a coordinated set of profiles, in the alloys and finishes the façade specifies.
- XF Gold Door
- KOCO 65 / 120
- XF GM55
- XF GD55
- Việt Pháp – Việt Ý
Every range the line runs
Sixteen extrusion presses, 50,000 tonnes a year and a die shop turning out 500 dies a month. This is how that capacity is organised — six ranges, each with its own systems, wall thicknesses and finishes.
Six ranges off one extrusion line
Architectural systems under the GOLD DOOR brand, industrial profiles to drawing, and the finishing to go with either.
Window & door systems
Casement, tilt, sliding and hydraulic sets, including the rotate-sliding system and stainless-railed sliders for large openings.
- Sliding 93
- Sliding 95
- Rotate sliding
- Hydraulic
- Tilt & turn
Curtain wall, railing & louvre
Through-floor façade systems in three depths, glass railing, window transoms and fixed or adjustable louvre blades.
- Façade 52
- Façade 62
- Façade 1100
- Glass railing
- Louvre
Industrial profiles
Profiles extruded to your drawing: solar mounting rail, machine framing, conveyor rail, heat sink, tube and awning sections.
- Solar rail
- Machine framing
- Heat sink
- Tube
- Conveyor rail
Furniture aluminium
Cabinet and wardrobe systems in 0.8–1.0 mm sheet and 1.4–2.0 mm framing, taking 6.36–10.36 mm glass, in matching finishes throughout.
- Kitchen cabinet
- Wardrobe
- Glazed door frame
- Shelving
Surface finishing & machining
Powder coating, electrophoretic finishing and wood-grain transfer, plus CNC machining, punching, cutting and fabrication before packing.
- Powder coating
- Wood grain
- Anodised
- CNC
- Fabrication
What the plant can actually do
Six factories, 57,000 m² of site, and a die shop that keeps tooling in house so a new section does not wait on a supplier.
- Extrusion lines
- 16
- Annual output
- 50,000 t
- Billet diameter
- from 5 in
- Standard length
- 6 m
- Alloys
- 6063, 6061
- Tempers
- T5, T6
- Wall thickness
- 0.9 – 2.0 mm
- Aluminium content
- 99%
Nothing here matches the section you need?
Send the drawing. Dies are cut in house at 500 a month, and OEM profiles are extruded to the customer's own section rather than to a catalogue number.